MAN — Removing and installing valves

Removing and installing valves Removing valves 5 6 D Remove cylinder head, see page 91 4 Fig. 1 3 7 Special tools for removing and installing the valve springs: 8 А Assembly plate for cylinder head and rocker arm bearing housing (not in tool case) Б Anchor plate with grid part В Guide sleeve Г Additional guide sleeve for 4-valve cylinder head Д Pressure fork Е Extension for pressure fork Ж Assembly cartridge for retaining wedges З Sleeve with large diameter for 2-valve cylinder head И Sleeve with small diameter for 4-valve cylinder head 2 9 1 1 Depending on the cylinder head, the sleeves are bolted onto the mounting cartridge. Fig. 2 Secure the cylinder head on mounting plate А . 2 1 Fig.

3 Fit guide sleeve Г over the valve spring for cen- tring. 4 3 Fig. 4 3 Screw guide sleeve В into anchor plate Б and push both parts over guide sleeve Г onto the cylin- der head. Bolt down the anchor plate. 2 4 4 103