Removing and installing valves Fig. 5 Feed mounting cartridge Ж with sleeve И (small dia.) into the guide sleeve and using the knurled grip insert the holder into the joint between the re- taining wedges. 7 9 5 Fig. 6 Attach pressure fork Д and press down as far as possible with the mounting cartridge. Press the knurled grip (arrow) down, turning a little if necessary. 5 6 Fig. 7 Release the pressure fork slowly. The retaining wedges must now be in the mounting cartridge. 7 Fig. 8 Remove the guide sleeves and the valve spring. Remove the anchor plate and attach it for removal of the next valve spring. 8 104