Removing and installing valve guides D Removing and attaching cylinder head, see page 91 D Remove and install valves, see page 103 1 2 Fig. 1 Special tool for removing and installing the valve guides and valve seats: А Press-in plates for valve seat inserts Б Spacer ring for А В Extraction and press-in punch for valve guides and valve seats Г Press-in sleeve for valve guides 1 4 3 Fig. 2 Press out the valve guide from the combustion chamber side with press-in punch В . 2 Fig. 3 Lubricate the new valve guide and press in with the press-in punch and press-in sleeve from the rocker arm side. Press-in depth (see publication “Service Data”). 3 Fig.
4 The press-in depth of the valve guides is determi- ned by the press-in sleeve. Note: When the valve guides have been re- placed, the valve seats must also be re- conditioned (refer to technical data and manufacturer’s instructions of the valve seat turning equipment available in the machine shops). 4 109