MAN — Refacing valves

Refacing valves Fig. 1 Apply abrasive paste to the tapered area of the valve seat. Lubricate the valve guide and insert the valve. 1 Fig. 2 Use a valve grinder to reface the valve seat by ap- plying moderate axial pressure and describing a turning motion. Note: Keep the valve stem and the valve guide free of abrasive paste. 2 Fig. 3 The valve seat must have a faultless, contained grinding pattern. The grinding pattern width is correct if the valve seat insert is in order. 2 1 А Valve tapered area Б Valve seat Fig. 4 3 А Valve seat insert Б Valve В Valve seat too wide Г Valve seat good 1 2 1 2 Note:

Valve seats which are too wide tend to accumulate coking residues, − valves start to leak − Valve seats which are to narrow prevent rapid dissipation of heat from the valve plate to the cylinder head, − valves burn − 3 4 4 115