Removing and fitting camshaft bearing bushes Fig. 5 Use a soft hammer (plastic or copper) to knock out camshaft bearing bushes 2, 3 and 4 in succession. 5 Press out the camshaft bearing bush, bearing 7 Fig. 6 Use the impact extractor (special tool) to pull out the cam bearing bush of bearing 7 from the fly- wheel side. 6 Fig. 7 Pull out the bearing bush. 7 Press out camshaft bearing bushes of bearings 5 and 6 Fig. 8 2 Press out the bearing bushes of bearings 5 and 6 from the flywheel side. Place the guide bush Б on the shaft with groove, ensuring that you have the correct bush side (the sides have different diameters!). The spring-loaded balls lock into the oil holes. 8 121