MAN — Removing and installing piston rings

Removing and installing piston rings Piston ring arrangement Fig. 1 1 Compression ring (double-sided keystone ring) 2 Compression ring (tapered compression ring) 3 Oil scraper ring (bevelled-edge ring) 1 2 3 1 Removing piston rings Fig. 2 Remove pistons with conrods. Fit conrod in a vice, use protective jaws. Set piston ring wrench to piston diameter. Fig. 3 2 Apply piston ring wrench to piston ring joint and disengage the piston ring from the piston ring groo- ves. Note: The coiled spring expanders mean that the oil scraper ring has greater tangential ten- sion. Carefully clean the piston ring grooves using saw- dust. Do not damage the piston ring grooves. 3 Checking ring end clearance Fig.

4 Insert the piston rings individually in the cylinders and use a feeler gauge to determine the ring end clearance. If the ring end clearance is too great, replace the piston rings. For ring end clearance, see “Service Data”. 4 138