MAN — Removing pistons from conrod and fitting, checking - replacing conrod

Removing pistons from conrod and fitting, checking − replacing conrod Fig. 5 Clean conrod. Inspect for external damage, re- place damaged conrods if necessary. Check parallel location of conrod and twisting of piston pin eye to bearing bush bore hole. In the case of deviations beyond the tolerance range, replace conrod. Ш 0.02 A A 5 Fig. 6 and Fig. 7 Place piston on the conrod. Caution: The recess for the oil injection nozzle in the piston shaft (arrow) must lie on the side of the short conrod foot. Insert piston pin. Engage fastenings. Fitting pistons, see page 134. 6 7 137