Replacing cylinder liners New cylinder liners and modified cylinder head gasket since March 2003 From March 2003 the cylinder bush, the upper seal on the cylinder bush, the cylinder head seal and the torque regulations on various series D 2876 four valve engines without Common Rail have been modified as standard. Note: To aid recognition, these engines do not have the sticker “First retightening of cylinder-head bolts completed” on one of the valve caps. Fig. 1 Version until 28.02.2003 Cylinder liner А with seal Б (2 toric seals per cylin- der liner). For differences see arrows. 1 2 1 Fig. 2 Version since 01.03.2003 Cylinder liner А with seal Б (1 profiled seal per cylinder liner).
For differences see arrows. 1 2 2 Caution: A mixture of old and new versions in the same engine is not permitted! Conversion is possible only if the cylinder head gasket, the cylinder liners and the cylinder liner seal are changed to the new version in all cylinders! Note: For modifications to cylinder head gasket see chapter “Removing / installing cylinder head”, page 90. 140