MAN — Replacing cylinder liners

Replacing cylinder liners Removing cylinder liners Note: Observe oversizes for cylinder liner out- side diameters and collar heights (see “Service Data”). D Remove cylinder head, see page 91 D Remove piston, see page 133 Fig. 1 Observe oversizes for cylinder liner outer diame- ters and collar heights (see page 191, item 32). 1 Fig. 2 Mark the cylinder liner position relative to the en- gine so that it can be reinstalled if reused. Insert the cylinder liner extractor apparatus into the cylinder liner, taking care not to damage the oil spray nozzle. 2 Fig. 3 Fit the support on the extractor spindle and screw on the nut.

Hold the extractor spindle in place and extract the cylinder liner by turning the nut. 3 Fig. 4 Remove the extractor apparatus and take out the cylinder liner. 4 141