Replacing cylinder liners Installing cylinder liners Fig. 9 Insert new O-rings for the lower seal (144x4) dry into the crankcase. Insert new O-rings for the upper seal (138x2) into the cylinder liner grooves. Do not overstretch the O-rings. Note: Do not use grease or sealing compounds of any type to install the cylinder liners and O-rings. 9 Figs. 10 and 11 Apply a thin coat of engine oil to the cylinder liner in the upper and lower O-ring areas. Apply a thin coat of engine oil to the lower O-rings in the crankcase. Insert the liners into the crankcase and press them in with both hands.
Then place a clean metal plate on the liner and exert uniform and downward pressure until the li- ner is seated in the crankcase recess. If noticeable resistance can be felt during this pro- cedure, the O-rings are no longer in their proper position. Reposition the O-rings and insert the liner again. 10 11 144