Checking injection nozzles Checking injection nozzle Fig. 1 The nozzle tester (hand tester) is used to check the opening pressure (injection pressure), leak-tightness and spray pattern of each injection nozzle. Use pure calibrating oil or pure diesel fuel for the test. Prior to testing, clean the nozzle and check it for wear. Check the nozzle with its nozzle holder. 1 Danger: The high injection pressure can cause seri- ous injury. Do not place hands under the jet spray. Wear safety goggles. 1 2 Fig. 2 А Testing device Б Inlet connection 2 Fig. 3 Feed the needle movement sensor cable through the testing device.
3 Insert the injection nozzle with inlet hole А towards the guide tube for pressure pipe Б in the testing device. Fig. 4 1 2 4 38