Changing the oil filter Caution: Old oil and used oil filters are hazardous waste. Observe safety instructions for the preven- tion of environmental damage. Figs. 1 and 2 Open the oil drain plug on the oil filter casing and catch emerging oil in a suitable container. Reinsert oil drain plug with new gasket. Danger: The oil filter casing and filter insert are filled with hot oil; danger of burns and scalding! 1 2 Fig. 3 Loosen the securing bolt of the filter cup. Remove filter cup and clean inside. Fig. 4 Insert a new filter cartridge and reinstall the filter casing with new seals. Reinsert oil drain plug with new gasket. Note:
To avoid twisting the gasket, hold the filter cup while tightening the tensioning screw. 3 Observe tightening torque for mounting bolt (see “Engineering S Data S Setting values”). Note: The pictures show the standard oil filter. Classifiable engines have a filter with a changeover feature. However, the oil filter cartridges are changed analogously. Fill engine oil and check for leaks after a short en- gine run Check oil level. 4 63