Removing and installing the oil cooler D Drain engine oil, see page 63 D Drain off coolant, see Page 43 D Remove oil filter, see Page 63 Fig. 1 Remove hose clamp on the coolant outlet pipe lea- ding from the oil cooler housing. Unscrew the mounting bolts from the oil cooler housing. Note: Do not remove the four 13 mm mounting bolts. They keep the oil cooler in place. 1 Figs. 2 and 3 Remove the oil cooler housing together with the oil cooler. Remove the oil cooler from the housing. 2 3 Fig. 4 Inspect the oil cooler for damage and replace if necessary. Fit oil cooler with new seals. Fit the oil filter with a new seal. Fill up with engine oil and coolant. 4 64