MAN — Removing and Installing / Repairing Oil Pump

Removing and Installing / Repairing Oil Pump Removing the oil pump Fig. 1 Drain engine oil from the oil pan and from the oil filters. Use a vessel of sufficient size to ensure that the oil does not overflow. Danger: The oil is hot− risk of scalding. Do not touch the oil drain plug with bare fingers. Oil is an environmental hazard. Handle it with care! 1 Caution: Old oil is hazardous waste. Observe safety instructions for the preven- tion of environmental damage. Fig. 2 Remove oil pan. Note: Various oil pan variants are possible. The picture shows a deep oil pan. 2 Fig. 3 Unscrew the oil intake pipe. 3 Fig. 4 Remove mounting bolts of pressure relief valve and the oil pump.

The overpressure valve is encapsulated. Opening pressure, see “Service Data”. Remove oil pump. 4 65