MAN — Removing and Installing / Repairing Oil Pump

Removing and Installing / Repairing Oil Pump Servicing the oil pump Fig. 5 Clamp the oil pump in a vice (use protective jaws). Remove the oil pump cover. 5 Fig. 6 Pull the driven oil pump wheel from the casing. Check the toothed wheels and pump casing for wear (see “Service Data”). 6 Fig. 7 Remove the oil pump drive gear. To do this, lay the pump on a suitable surface and press off the drive gear with a mandrel. To install, place the drive gear on the shaft, sup- porting the opposite shaft end in the process. Press on the drive wheel, observing the prescribed gap (see “Service Data”). 7 Fig. 8 Fit the cover. Tighten the mounting bolts with the prescribed tor- que.

Grind or exchange covers if they are severely worn. 8 66