Turbocharger, troubleshooting Before replacing the turbocharger, carry out the following checks Turbochargers are frequently replaced if engine oil consumption is too high, power output too low or intake or exhaust gas noises appear to be abnormal. Subsequent inspections by the manufacturer of the supposedly defective parts frequently prove the turbo- chargers to be in working order. To ensure that only defective turbochargers are replaced in future, the following checks must be carried out beforehand: If oil consumption is too high Check the air filter for contamination, Ensure adequate engine room ventilation, Check the intake pipework for restricted cross-section (caused e.g.
by damage, contamination). These causes give rise to increased oil consumption on account of the increased vacuum pressure at the compressor inlet. Check the outside of turbocharger for traces of oil. Oil consumption caused by the turbocharger is dependent on bearing wear and results in relatively early mechanical damage. If engine power output is unsatisfactory Ensure correct adjustment of start of fuel delivery, valve clearance, speed adjustment (pedal value) Also check the following: the compression, the charge-air pressure, the pressure in the inlet chamber of the injection pump, the exhaust back pressure.
If the above checks fail to establish a possible cause, check the turbocharger for: coking in the turbine area, which impairs the movement of the wheel assembly (can be eliminated by axial movement) dirt in the compressor area damage caused by foreign objects If a significant amount of dirt has accumulated, clean the compressor end and check the bearing clearance. Caution: Do not damage the light alloy compressor wheel. 81