honda — Service Information

BF40A-BF50A No. I Tool name I Toolnumber 3. SPECIAL TOOLS Application 1 Vacuum gauge attachment 5 x 08 x 120L Vacuum gauge attachment 5 x 08 x 50L 0751 0-30001 00 or 0751 0-3000200 Carburetor synchronization 2 4. APPLYING LIQUID SEALANT I Apply liquid sealant to the primary gear case gasket and oil pan gasket as follows: Applying area , , Assemble the crankcase side cover and oil pan within the specified time after application of a sealing agent. Example: - Within 90 minutes when using Three Bond #1211. - Within 30 minutes when using Three Bond #1216. Apply about 1 - 5 mm (0.04 - 0.20 in) width. Wait for 15 minutes after assembly. Do not add oil dur- ing this period.

Apply 1 - 5 mm (0.04 - 0.20 in) width. PRIMARY GEAR CASE GASKET PRIMARY GEAR CASE GASKET 1) Clean the engine and primary gear case mating sur- faces with a degreasing cleaning agent or a clean shop towel (see base shop manual). Applying area 2) Apply liquid sealant to the position shown on both side of a new primary gear case gasket. 7?L LJ I Apply 1 - 5 mm (0.04 - 0.20 in) width. OIL PAN GASKET OIL PAN GASKET 1) Clean the engine and oil pan mating surfaces with a degreasing cleaning agent or a clean shop towel (see base shop manual). 2) Apply liquid sealant to the position shown on both side of a new primary gear case gasket. 2-3