BF40AoBF50A 4) Remove the float pin by using a commercially avail- able 2.0 mm pin driver. [I] 2.0 mm PIN DRIVER (Commercially available) Drive out the float pin by lightly tapping the pin dri- ver from the opposite side of the knurled section of the float pin. 5) Remove the float and float valve. [51 141 , [2] FLOAT KNURLED SECTION FLOAT PIN 6) Remove the main jet taking care not to damage the main jet. 11 1 PLUG SCREW \ 7) Remove the plug screw, main nozzle and jet nozzle taking care not to damage them. 151 MAIN NOZZLE 141 MAIN JET JET NOZZLE [3] O-RING Do not reuse. 5-1 0