honda — Fuel System

CARBURETOWINTAKE MANIFOLD INSTALLATION Install a new intake manifold gasket onto the cylinder head. Install the carburetor and manifold assembly and loosely install the 6 mm cap nuts, fuel tube clamp and 6 x 32 mm flange bolts. 1 CARBURETORlMANlFOLD 12 N*m (1.2 kgf*m, 9 Ibf*ft) INTAKE MANIFOLD GASKET [4] FUEL TUBE CLAMP Tighten the 6 x 32 mm flange bolts and 6 mm cap nuts to the specified torque in the numbered sequence shown in 2 - 3 steps. TORQUE: 26 N *m (2.7 kgf em, 20 Ibf O f t ) 6 x 32 (5) 5-22