THROTTLE BRACKETISHIFT LEVER/ 15. HANDLEBAR (TILLER HANDLE TYPE ONLY) ~ 1. LONG TILLER HANDLE I 1. LONG TILLER HANDLE a. REMOVAL 111 6 mm PLAIN 1) Remove the engine cover and set the shift lever in the neutral position. SEPARATOR 2) Remove the two 6 x 28 mm flange bolts, two 6 x 40 mm flange bolts and four 6 mm plain washers, and remove the separator cover. ' 6 x 40 (2) 3) Remove the 14P connector from the connector holder and disconnect the 14P connector. PI 14P 121 CONNECTOR HOLDER 4) Remove the 6 mm lock pins and 6 mm washers, the disconnect the throttle and shift cables. I [l] THROTTLE CABLE [2] SHIFT CABLE [31 6 mm WASHER (4) 15-1