honda — Print

BF40A-BF50A 3) Remove the four 5 mm socket bolts and remove the oil tank and motor cord bracket B. [l] 5 mm SOCKET BOLT (4) \ [5] MOTOR CORD BRACKET B 4) Remove the O-ring from the cylinder Comp. Discard the O-ring. Replace it with new one during reassem bl y. [2] OIL TANK \ [41 WIRE BAND I CLIP (2) [3] O-RING Do not reuse. 1 1 5) Remove the oil seal using small screw driver as shown. [l] OIL SEAL -1 / p z z r Discard the oil seal. Replace it with new one during reassem bl y . CAUTION: Take care not to damage the oil seal installation section when removing the oil seal. PI OIL SEAL INSTALLATION SECTION 13-4