BF40AoBF50A 6) Remove the outer tube guide using the lock nut I wrench. Remove the O-rings from the outer tube guide and discard them. Replace the O-rings with new ones dur- ing reassembly. r11 LOCK NUT WRENCH 070PA-ZW40100 GUIDE [3] O-RINGS pzizr 7) Remove the valve body and cylinder assembly from the vise. 8) Remove the cylinder/piston assembly from the valve body, and drain ATF from the cylinder assembly and valve body. r11 [2] BOTTOM PIECE CY LINDEWPISTON 9) Remove the O-ring from the bottom piece and discard it. Replace the O-ring with new one during reassem- bly. \ I / I 131 I Do not reuse. 1 VALVE BODY 1315