BF40AoBF50A 6) Remove the spool valve cap using a commercially available 2.8 mm driver bit. PI DRIVER BIT, 2.8 mm I (Commercially available) 7) Apply small squirt of air pressure to the oil hole in the spool valve cap to remove the valve B. Remove the valve B from the spool valve cap. Remove the O-rings from the spool valve cap and valve B and discard them. Replace the O-rings with the new ones during reassembly. [l] VALVE B / / 121 SPOOL 1 ~ o n o t reuse. 1 8) Remove the spool valve from the valve body. Check the backup ring on the spool valve for damage and scratches. Replace the backup ring if it is dam- aged or scratched. [l] SPOOL VALVE [l] SPOOL VALVE 1 k K U / p R l N G 13-9