2) Apply ATF to a new O-ring, and install it on the valve 3) Apply ATF to the valve B and install the valve B in the €3. valve body noting the installation direction. 4) Apply ATF to a new O-ring, and install it on the sleeve. [l] VALVE B / [2]SLEEVE 5) Set the new backup ring on the spool valve and apply [3] SPOOL / 1 VALVE ATF to the outer surface of the spool valve. 6) Install the spool valve in the sleeve noting the installa- tion direction. 7) Apply ATF to the sleeve, and install the sleeve in the 1.5 x 10.7 mm [6] O-RING valve body noting the installation direction. / // 141 EfNcKUP 1.5 x 13.5 mm [5] O-RING / -/ 8) Apply ATF to a new O-ring, and install it on the valve 6.
~~ 9) Apply ATF to the valve B and install it in the spool valve cap noting the installation direction. 10)Apply ATF to the new O-rings, and install the O-rings on the spool valve cap. 11)Tighten the spool valve cap to the specified torque VALVE CAP 7 . -r [l] VALVE B using a commercially available 2.8 mm driver bit. 1.5 x 15.5 [3] O-RING TORQUE: 22 N*m (2.2 kgf*m, 16 Ibf*ft) mm .5 mm 1.5 x 10.7 mm 151 DRIVER BIT, 2.8 mm (Commercially available) 151 DRIVER BIT, 2.8 mm (Commercially available) 13-1 5