BF40AoBF50A 12)Apply ATF to the sealing washer, and set it in the valve body at right angles. Be careful not to set it at an inclined angle, which can lead to the collapsed sealing washer. [l] MANUAL VALVE 13)Apply ATF to a new D-ring and a new O-ring, and install them on the manual valve. 14)Tighten the manual valve to the specified torque, and set the internal circlip in the groove in the valve body securely. [3] O-RING 1.2 x 5.8 mm 2.4x9.8 mm TORQUE: 1.7 Nom (0.17 kgfom, 1.2 Ibfoft) [4] SEAL WASHER [5] D-RING 1.2 x 5.8 mm 2.4x9.8 mm [6] INTERNAL ClRCLlP I 15)Apply ATF to new O-ring, and install it on the 2-way valve.
16) Install the 2-way valve to the valve body and tighten the 2-way valve to the specified torque. [l J 2-WAY VALVE TORQUE: 7 Nom (0.7 kgfom, 5.1 Ibfoft) I [2] O-RING 1.5 x 9.5 mm [3] O-RING / 1.5 x 9.5 mm \ - 1 [l] 2-WAY VALVE 13-1 6