17)Apply ATF to a new O-ring, and install it on the down relief valve seat. 18) Apply ATF to the down relief valve seat and install it in the valve body as shown noting the direction. 19) Install the steel ball, spring guide and the valve spring in the down relief valve seat. 20)Apply ATF to a new O-ring, and install it on the upper 21)Apply ATF to the upper chamber safety valve and chamber safety valve. install it in the valve body noting the direction shown. 1.5 x 3.5 mm 161 DOWN RELIEF VALVE SEAT w w [ 4 1 UPPER CHAMBER SAFETYVALVE 22)Apply ATF to the two new O-rings and install the 0- rings in the valve body in the positions shown.
23)lnstall the gear pump assembly in the valve body by aligning the projection at the bottom of the gear pump assembly with the positioning hole in the valve body. Take care not to let the O-rings come out of posi- tion in the valve body. 24)Tighten the socket bolts to the specified torque. TORQUE: 5 N*m (0.5 kgfem, 1.3 Ibfoft) POSITIONING 13-1 7