honda — Print

18)Apply ATF to a new O-ring, and install it on the bot- tom piece. [1 I CYLINDEWPISTON ASSY. PI O-RING ;7" 19)Hold the valve body in a vise with shop towel or soft jaws as shown CAUTION: Take care not to tighten the vise too tight as it damages the valve body. 20)Loosen the manual valve 3 turns or more and pour the fresh ATF into the cylinder chamber up to the top edge of the valve body. 3.5 x 41.7 mm I 21 Install the cylinder piston assembly to the valve body. 22)Apply ATF to new O-rings and install them on the 23)Pour the fresh ATF into the cylinder chamber of the outer tube guide. 11 1 O-RING [21 OUTER TUBE GUIDE / 2.4x41.2 mm valve body up to the top edge of the valve body.

24) Install the outer tube guide loosely. O-RING 2.0 x 45.5 mm [31 141 O-RING 2.0 x 49.5 mm II 13-22