103 Operation Section Towing Information SEBU7645-06 Consult your Caterpillar dealer or refer to the Service Manual for the removal procedures and for the installation procedures. When the drive shafts are removed, the machine has NO parking or secondary brakes. The machine can roll and cause personal injury or death. Block the wheels cannot move. securely so that the machine The towing connection must be rigid, or towing must be done by two machines of the same size or larger than the towed machine. Connect a ma- chine on each end of towed machine. 3. Release the parking brake. Note:
For operation of the parking brake, refer to Operation and Maintenance Manual, “Operator Controls - Parking Brake Control’. 4. Inspect the machine for power train damage. Remove all four axle shafts if any damage is suspected. 5. Fasten the tow bar to the disabled machine. 6. Remove the wheel blocks. Tow the machine slowly. Do not exceed 2 km/h (1.2 mph). A WARNING Personal injury or death can result from a brake malfunction. Be sure all necessary repairs and adjustments have been made before a machine that has been towed to a service area, is put back into operation.