Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

106 Maintenance Section Tire Inflation Information Maintenance SEBU7645-06 Section ya Proper nitrogen inflation equipment, Tire Inflation Information i00095080 Tire Inflation with Air SMCS Code: in using the equipment, and training are necessary to avoid over inflation. A tire blowout or rim failure can result from improper or misused equipment and per- sonal injury or death can occur. A tire blowout and/or rim failure can occur if the inflation equipment is not used correctly, due to the fact that a fully charged nitrogen cylinder's pres- 4203 sure is approximately 15000 kPa (2200 psi). Use a self-attaching inflation chuck and stand be- hind the tread when inflating a tire.

There are other benefits to using nitrogen in addition to reducing the risk of an explosion. The use of nitrogen for tire inflation lessens the slow oxidation Proper inflation equipment, and training in using the equipment, are necessary to avoid overinflation. A tire biowout or rim failure can result from improper or misused equipment. Before inflating tire, install on the machine or put tire in restraining device. NOTICE Sei the tire inflation equipment regulator at no more than 140 kPa (20 psi) over the recommended tire pressure. of the rubber. Use of nitrogen also slows gradual tire deterioration.

This is especially important for tires that are expected to have a long service life of at least four years. Nitrogen reduces the corrosion of rim components. Nitrogen also reduces problems that result from disassembly. A tire blowout or a rim failure can cause personal injury. Use a self-attaching inflation chuck and stand behind the tread when inflating a tire, to prevent per- sonal injury. Consult your Caterpillar dealer for operating pressures. 102358629 Tire Inflation SMCS Code: 4203; Pressure than 140 kPa (20 psi) over the recommended tire pressure.

7500 The tire inflation pressures that are shown NOTICE Set the tire inflation equipment regulator at no more Use 6V-4040 in the following table are cold inflation pressures for tires on Caterpillar machines and shipping pressures for tires on Caterpillar machines. Tire Inflation with Nitrogen Inflation Group or an equivalent inflation group to inflate tires with a nitrogen gas cylinder. Reference: For tire inflation instructions, refer to Special Instruction, SMHS7867, “Nitrogen Tire Inflation Group”. For nitrogen inflation, use the same tire pressures Caterpillar recommends the use of dry nitrogen gas for tire inflation and for tire pressure adjustments.

This includes all machines with rubber tires. Nitrogen that are used for air inflation. Consult your tire dealer oo NES IS MSIE for operating pressures. is an inert gas that will not aid combustion inside the tire. Operating Pressure The operating inflation pressure is based on the i naditinn following conditions. ¢ The weight of a ready-to-work machine without work tools ¢ The rated payload