Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

123 Maintenance Section Bucket Tips - Inspect/Replace SEBU7645-06 103657242 Bucket Tips - Inspect/Replace SMCS Code: 6805-040; 6805-510 Personal injury or death can result from the bucket falling. Block the bucket before changing bucket tips. Bucket Tips Illustration 129 g00891055 Integrated Toolcarrier @) Illustration 131 g00101352 (1) Usable (2) Replace the tip. (3) Replace the tip. Check the bucket tips for wear. If the bucket tip has a hole, replace the bucket tip. 1. Remove the pin from the bucket tip. The pin can be removed by one of the following methods. « Use a hammer and a punch from the retainer side of the bucket to drive out the pin.

IHustration 130 g00891056 VersaLink Wipe off the fittings before you apply any lubricant. Apply lubricant to the grease fittings. The grease fittings are located on both sides of the bucket. « Use a Pin-Master. Follow Step 1.a through Step 1.c for the procedure.