126 SEBU7645-06 Maintenance Section Cab Air Filter - Clean/Replace Reference: For more information, refer to Specifications, SENR3130, “Torque Specifications’. 101699420 Cab Air Filter - Clean/Replace SMCS Clean Code: 7342-070; 7342-510 Filters Note: Clean the filter elements more often in dusty conditions. If there is a noticeable reduction in the airflow from the air vents, check the filter elements. g00447093 litustration 140 §. Remove the filter cover and filter elements. The filter elements are located near the left side of the operator seat. Note: Raise the operator seat in order to remove the filter elements. 6. Clean the filter elements with compressed air.
You can also wash the filter elements with a solution of warm water and of a nonsudsing household detergent. Illustration 139 g00614999 1. Remove the filter cover. The filter cover is located on the left side of the operator compartment under the steps. 7. Rinse the filter elements in clean water. Air dry the filter elements thoroughly. 8. Replace any filter elements that are worn or damaged. 9. Face the seal toward the parking brake lever when N you install the filter element. Remove the filter elements. Clean the filter elements with compressed air. You can also wash the filter elements with a solution of warm water and of a nonsudsing household detergent.
Do not wash the filter elements while the filter elements are installed on the machine. 102230814 Circuit Breakers and Fuses Reset/Replace SMCS Code: 1417-510; 1420-529 3. Rinse the filter elements in clean water, Air dry the filter elements thoroughly. 4. Install the filter elements and replace the cover. Circuit Breakers Reset The circuit breakers are located in n the engine compartment on the left side of the machine. -