Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

147 Maintenance Section Hydraulic System Oil Level - Check SEBU7645-06 8. Maintain the hydraulic oil level between the top and the bottom mark on the sight gauge. Add oil, if necessary. 9. Inspect the gasket on the hydraulic tank filler cap for damage. Replace the gasket, if necessary. 102091697 Hydraulic System Oil Sample - Obtain : SMCS Code: 5050-008; 5056-008; 7542-008 10. Install the hydraulic tank filler cap. 101786775 Hydraulic System Check Oil Level - SMCS Code: 5095-535-FLV Note: Check the hydraulic system oil level with the machine on a level surface. Illustration 197 g00614037 Use the sampling valve in order to obtain a sample of the hydraulic oil.

The engine must be running in order to take a sample of the hydraulic oil. Refer to Special Publication, SEBU6250, “Caterpillar Machine Fluids Recommendations”, “S-O-S Oil Analysis” for information that pertains to obtaining and oil sample. Refer to Special Publication, PEHP6001, “How To Take A Good Oil Sample” for more information about obtaining an oil sample. illustration 195 g00910327 101822082 1. Maintain the hydraulic oil level between the top and the bottom mark on the sight gauge. Add oil, if necessary. Hydraulic Tank Breather Replace SMCS Code: 5056-510-BRE The hydraulic tank breather is located on the right side of the machine in the engine compartment.

lilustration 196 g00910320 2. The hydraulic tank filler cap is located on the top of the engine compartment. Remove the hydraulic tank filler cap and add hydraulic oil, if necessary. 3. Clean the hydraulic tank filler cap. Install the hydraulic tank filler cap. Illustration 198 g00911777