27 Safety Section Operator Station SEBU7645-06 c. If no ride control system is available, reduce speed in order to prevent bounce. Caterpillar, Inc. www.cat.com d. Haul the machines between workplaces. 9. Less operator comfort may be caused by other risk factors. The following guidelines can be effective 103634321 Operator Station in order to provide better operator comfort: SMCS a. Adjust the seat and adjust the controls in order Any modifications to the inside of the operator station should not project into the operator space or into the space for the companion seat (if equipped). to achieve a good posture. b. Adjust the mirrors in order to minimize a twisted posture. c.
Provide breaks in order to reduce long periods of sitting. d. Avoid jumping from the cab. e. Minimize repeated handling of loads and lifting of loads. f. Minimize any shocks and impacts during sports and leisure activities. Sources The vibration information and calculation procedure is based on “ISO/TR 25398 Mechanical Vibration - Guideline for the assessment of exposure to whole body vibration of ride on operated earthmoving machines”. Harmonized data is measured by international institutes, organizations and manufacturers. This literature provides information about assessing the whole body vibration exposure of operators of earthmoving equipment.
The method is based on measured vibration emission under real working conditions for all machines. You should check the original directive. This document summarizes part of the content of the applicable law. This document is not meant to substitute the original sources. Other parts of these documents are based on information from the United Kingdom Health and Safety Executive. Refer to Operation and Maintenance Manual, SEBU8257, “The European Union Physical Agents (Vibration) Directive 2002/44/EC’” for more information about vibration. Consult your local Caterpillar dealer for more information about machine features that minimize vibration levels.
Consult your local Caterpillar dealer about safe machine operation. Use the following web site in order to find your local dealer: Code: 7000 The addition of a radio, fire extinguisher, and other equipment must be installed so that the defined operator space and the space for the companion seat (if equipped) is maintained. Any item that is brought into the cab should not project into the defined operator space or the space for the companion seat (if equipped). A lunch box or other loose items must be secured. Objects must not pose an impact hazard in rough terrain or in the event of a rollover.