26 SEBU7645-06 Safety Section Sound Information and Vibration Information Table 1 “ISO Reference Table A - Equivalent vibration levels of whole body vibration emission for earthmoving equipment.” Machine Typical Type Operating Vibration Levels Activity X axis Y axis Z axis load and carry motion 0,84 0,81 0,52 mining application™ 1,27 0,97 0,81 transfer@ 0,76 0,91 0,49 0,99 0,84 0,54 V-shape motion® () Loading at the face @) Travel at high speed on the job site or on public roads (3) Loading a truck in short cycles Note: Refer to “ISO/TR 25398 Mechanical Vibration - 3. Keep the terrain in good condition.
Guideline for the assessment of exposure to whole body vibration of ride on operated earthmoving machines” for more information about vibration. This publication uses data that is measured a. Remove any large rocks or obstacles. b. Fill any ditches and holes. by international institutes, organizations and manufacturers. This document provides information about the whole body exposure of operators of c. Provide machines and schedule time in order to maintain the conditions of the terrain. earthmoving equipment. Refer to Operation and Maintenance Manual, SEBU8257, “The European Union Physical Agents (Vibration) Directive 2002/44/EC” for more information about machine vibration levels.
The Caterpillar suspension seat meets the criteria of “ISO 7096”. This represents vertical vibration level under severe operating conditions. This seat is tested with the input “spectral class EM3”. The seat has a transmissibility factor of “SEAT<1.0". 4, Use a seat that meets “ISO 7096”. Keep the seat maintained and adjusted. a. Adjust the seat and suspension for the weight and the size of the operator. b. Inspect and maintain the seat suspension and adjustment mechanisms. 5. Perform the following operations smoothly. The whole body vibration level of the machine varies. a. Steer There is a range of values. The low value is 0.5 meter per second squared. The machine meets the b.
Brake short term level for the design of the seat in “ISO 7096”. The value is 1.13 meter per second squared c. Accelerate. for this machine. d. Shift the gears. Guidelines for Reducing Vibration Levels on Earthmoving Equipment Properly adjust machines. 6. Move the attachments smoothly. Properly maintain 7. Adjust the machine speed and the route in order machines. Operate machines smoothly. Maintain the to minimize the vibration level. conditions of the terrain. The following guidelines can help reduce the whole body vibration level: a. Drive around obstacles and rough terrain. 1. Use the right type and size of machine, equipment, and attachments. b.
Slow down when it is necessary to go over rough terrain. 2. Maintain machines according to the manufacturer's recommendations. 8. Minimize vibrations for a long work cycle or a iong travel distance. a. Tire pressures a. Use machines that are equipped with suspension systems. b. Brake and steering systems b. Use the ride control system on wheel loaders. c. Controls, hydraulic system and linkages