Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

25 SEBU7645-06 Safety Section Sound 103001254 Sound Information and Vibration Information SMCS Code: 7000 Sound Level Information The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when “ANSI/SAE J1166 OCT 98” is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. Information and Vibration Information Information Concerning Whole Body Vibration Level This section provides vibration data and a method for estimating the vibration level for wheel loaders. Note: Vibration levels are influenced by many different parameters.

Many items are listed below. ¢ Operator training, behavior, mode, and stress e Job site organization, preparation, environment, weather, and material e Machine type, quality of the seat, quality of the suspension system, attachments, and condition of the equipment Hearing protection may be needed when the it is not possible to get precise vibration levels for machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is this machine. The expected vibration levels can be estimated with the information in Table 1 in order to calculate the daily vibration exposure.

A simple operated with a cab that is not properly maintained or when the doors and windows are open for extended evaluation of the machine application can be used. periods or in a noisy environment. Estimate the vibration levels for the three vibration The average exterior sound pressure level is 103 directions. For typical operating conditions, use the average vibration levels as the estimated level. With an experienced operator and smooth terrain, subtract dB(A) when the “SAE J88Apr95 - Constant Speed Moving Test” procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions:

distance of 15 m (49.2 ft) and “the machine moving forward in an intermediate gear ratio”. Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives” The dynamic operator sound pressure level is 73 dB(A) when “ISO 6396:1992” is used to measure the value for an enclosed cab. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.

“The European Union Physical Agents (Vibration) Directive 2002/44/EC” Vibration Data for Wheel Loaders Information Concerning Hand/Arm Vibration Level When the machine is operated according to the intended use, the hand/arm vibration of this machine is below 2.5 meter per second squared. the Scenario Factors from the average vibration level in order to obtain the estimated vibration level. For aggressive operations and severe terrain, add the Scenario Factors to the average vibration level in order to obtain the estimated vibration level. Note: All vibration levels are in meter per second squared.