Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

39 Product Information Section General Information SEBU7645-06 Table 19 930G Bucket Part Number RATED BUCKET LOAD Rated Volume Ground Engaging Tools (HIGH LIFT) (pin coupler) Rated Operating | Dump Clearance (A) Load Bolt-on Cutting Edge | 2.1 m?° (2.75 yd’) | 3518 kg (7756 Ib) 252-6909 2.0 m® (2.6 yd’) | 3488 kg (7690 Ib) Teeth Bolt-on Cutting Edge | 239-7004 256-8898 251-6600 256-8911 244-3674 2.3m?

(3.0 yd®) | 3497 kg (7710 Ib) inches) 3527 mm (139 inches) 3492 mm (137 inches) 2.1 m® (2.75 yd’) | 3467 kg (7643 Ib) Teeth mm 3593 (141 Teeth and Segments | 2.1 m® (2.75 yd®) | 3437 kg (7577 Ib) mm 3527 (139 inches) 3557 mm (140 inches) Teeth and Segments | 2.3 m* (3.0 yd’) | 3415 kg (7529 Ib) Bolt-on Cutting Edge | 2.3 m* (3.0 yd’) | 3405 kg (7507 Ib) 2.1 m? (2.75 yd’) | 3375 kg (7441 Ib) Teeth 3492 mm 2.3 m® (3.0 yd’) | 3324 kg (7328 Ib) Flat Mounted Teeth 2.4 m?

(3.1 yd’) Bolt-on Cutting Edge | Teeth 965 mm (38.0 inches) 927 mm (36.5 inches) 965 mm (38.0 inches) 1006 mm (39.6 inches) 967 mm (38.0 inches) 1006 mm (137 inches) (39.6 inches) 3417 mm (135 inches) 925 mm (36.4 inches) 3485 mm (137 inches) Teeth and Segments | Reach (B) 3417 mm 892 mm (35.1 inches) 925 mm (135 inches) (36.4 inches) | 3402 kg (7500 Ib) 3499 mm (138 inches) 877 mm (34.5 inches) 2.5 m’ (3.3 yd’) | 3365 kg (7719 Ib) 3371 mm (133 inches) 971 mm (38.2 inches) . 2.3 m® (3.0 yd’) | 3336 kg (7355 Ib) 3439 mm (135 inches) Teeth and Segments | 2.5 m° (3.3 yd’) | 3284 kg (7240 Ib) Ejector with Bolt-on Cutting Edge 3.1 m?

(4.1 yd*) | 3100 kg (6834 Ib) 3371 mm 938 mm (36.9 inches) 971 mm (133 inches) (38.2 inches) 3238 mm (127 inches) 980 mm (38.6 inches) (1) Rated loads are based upon a standard machine with the following conditions: Implements, Full fuel tank, ROPS Cab, 80 kg (176 Ib ) operator, 600/65 R25 L3 or equivalent tires, Optional Counterweight, Limited Slip, HD Rear Axle, Guards, and Blue Angel Table 20 930G RATED LOAD (HIGH LIFT) (PENETRATION BUCKET) Bucket Part Number Ground Engaging Tools Rated Volume Rated Operating | Dump Clearance (A) Load 251-9880 (quick coupler) Flush Mounted Teeth 2.3 m® (3.0 yd’) 3237 kg (7136 Ib) (pin Flush Mounted 2.3 m?

(3.0 yd’) 3438 kg (7579 Ib) 251-9879 coupler) Teeth 3393 mm (134 inches) 3499 mm (138 inches) Reach (B) 984 mm (38.7 inches) 877 mm (34.5 inches) (1) Rated loads are based upon a standard machine with the following conditions: Implements, Full fuel tank, ROPS Cab, 80 kg (176 Ib ) operator, 600/65 R25 L3 or equivalent tires, Optional Counterweight, Limited Slip, HD Rear Axle, Guards, and Blue Angel