47 Product Information Section General Information SEBU7645-06 930G Table 38 930G sat — (> Bem Rated Load for Material Handling Arm® oe Dimension Standard (A) 2363 High Lift kg 2096.5 (5216 pounds) (B) (C) (1) Rated 1889.5 kg (4622 pounds) kg 1705 kg (4166 pounds) (3759 pounds) 1576 kg (3474 pounds) 1438.5 kg (3171 pounds) loads are based upon a standard machine with the following conditions:
Implements, Full fuel tank, ROPS Cab, 80 kg (176 Ib ) operator, 600/65 R25 L3 or equivalent tires, Optional Counterweight, Limited Slip, HD Rear Axle, Guards, and Blue Angel Logging Fork Rated Load 901116915 lilustration 19 Failure to comply to the rated load can cause possible personal injury or property damage. 930G Material Handling Arm Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations. Note: Rated loads should be used as a guide.
The Table 37 operator must be aware of the following conditions: 930G Material Handling Arm® Dimension Standard High Lift (A) 3354 mm (132 inches) 3748 mm (148 inches) « Uneven ground (B) 4353 mm (171 inches) 4747 mm (187 inches) ¢ Soft ground (C) 5353 mm (211 inches) 5747 mm (226 inches) e Other poor ground conditions (D) 7746 8303 (E) mm mm (305 inches) (327 inches) 3730 3560 mm mm (147 inches) (140 inches) (F) 1886 mm (74.3 inches) 2820 mm (111 inches) (G) 2217 mm (87.3 inches) 2107 mm (82.9 inches) (1) Rated loads are based upon a standard machine with the following conditions:
Implements, Full fuel tank, ROPS Cab, 80 kg (176 Ib ) operator, 600/65 R25 L3 or equivalent tires, Optionai Counterweight, Limited Slip, HD Rear Axle, Guards, and Blue Angel « Work tools In European applications, the rated load is defined by “EN 474-3”. The rated operating load for a firm, level surface is defined by the least amount of weight of the following conditions. « 85% of the full turn static tipping load ¢ The minimum lifting capacity ¢ The minimum tilt capacity The rated operating load for rough terrain is defined by the least amount of weight of the following conditions. « 75% of the full turn static tipping load ¢ The minimum lifting capacity ¢ The minimum tilt capacity