48 Product Information Section General Information SEBU7645-06 For North American applications, the rated operating load is defined by “SAE J1197 Feb 91” as 50% of the full turn static tipping load. g00630434 Illustration 20 Position (A) represents the placement represents the reach. height. Position (B) The maximum height from the ground to the top face of the forks is given for forks that are horizontal at maximum lift height. The reach from the front tires to the front face of the forks is given for forks that are horizontal at maximum lift height. Rated loads are based upon a standard machine with the following conditions:
e Lubricants Full fuel tank ¢ Enclosed ROPS 80 kg (176 Ib) operator 17.5 R25 12 L2 or equivalent tires Optional 175 kg (386 lb) counterweight NOTICE Log and lumber forks should not be used with the high lift boom. Table 39 RATED LOADS Fork Part Number 154-8708 FOR LOG AND LUMBER FORKS WITH A STANDARD BOOM AND COUPLER ALL NORTH AMERICAN CONDITIONS (“SAE J1197 FEB 91”) Fork Tine Length 1220 mm (4 ft) FOR Rated Operating Placement Height Reach Load (A) (B) 2126 kg (4677 Ib) 3582 mm (121 ft 9 inches) 873 mm (2 ft 10 inches)