Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

53 Product Information Section Identification Information SEBU7645-06 For machines compliant to “1998/37/EC’, the following information is stamped onto the CE plate. momma GaP BATERPRLARpy = GAP For quick reference, record this information in the spaces that are provided below. e : i ¢ Engine Power for primary engine (kW) isje : CATERFELAS ¢ Typical machine operating weight for European market (kg) 3S id Ba e Year For the name of the manufacturer, the address of the manufacturer, and the country of origin, refer to the PIN plate. 101727292 Emissions Certification Film SMCS Code:

1000; 7000; 7405 The certification label (if equipped) is used to verify an engine's conformance to the emissions requirements of the EPA. This label is located on the engine. Illustration 23 g00921761 (3) PIN Plate (4) CE Mark Machine PIN CE Mark This plate is located on the bottom left side of the Identification Plate. Note: The CE plate is on machines that are certified to the European Union requirements that are listed on the “Document of Conformity”. If the machine is equipped with the plate for the European plate is attached to the PIN plates. Union, the information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.

e Engine Power for primary engine (kV) * Engine Power for additional engine (if equipped) (kW) * Typical machine operating weight for European market (kg) e Year of construction « Machine Type