Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

59 SEBU7645-06 Operation Section Machine Operation Pull up on the back cushion angle lever (1). Hold the back cushion angle lever and adjust the back seat cushion to the desired angle. Release the back cushion angle lever in order to lock the back seat cushion. Pull up on the fore/aft lever (2). Hold the fore/aft lever. Slide the seat forward to the desired position or slide the seat backward to the desired position. Release the fore/aft lever in order to lock the seat into position. Turn knob (3) clockwise in order to increase the stiffness of the suspension. Turning the knob counterclockwise decreases the stiffness of the suspension. Set the weight to the approximate weight setting.

Do not turn the knob past the maximum weight setting or past the minimum weight setting. Pull up headrest (1) in order to remove the headrest. Adjustable Armrest Rotate knob (2) in order to adjust the angle of the armrest. Make this adjustment when you are in the operating position. Seat Adjustment