60 SEBU7645-06 Operation Section Machine Operation Seat Adjustment Illustration 39 900621804 Turn the lumbar support lever (9) clockwise to a horizontal position in order to utilize the lumbar support. If iumbar support is not desired, turn the lumbar support lever counterclockwise to a vertical position. Contour Series Air Seat IHustration 41 g00102512 Pull up the lever (3) for the back cushion angle. Hold up the lever and adjust the seat cushion to the desired angle. Release the lever in order to lock the seat cushion. Pull up the fore/aft lever (4). Hold up the lever and slide the seat to the desired position. Release the lever in order to lock the seat into position.
Headrest Pull up the lever (5) for the angle of seat cushion and raise the front of the seat cushion to the desired angle. To lower the cushion into the desired position, pull up the lever and push down the front of the seat cushion. Release the lever in order to lock the seat cushion into one of three positions. Push in the knob (6) in order to decrease the seat height. Pull the knob in order to increase the seat height. Note: The engine start switch key must be in the ON position in order to increase the stiffness of the seat. g00102519 IHustration 40 Pull up headrest (1) in order to remove the headrest. Adjustable Armrest Rotate knob (2) in order to adjust the angle of the armrest.
Make this adjustment when you are in the operating Di aa posi ion Nee INustration 42 g00102520 Turn the lumbar support lever (7) clockwise to a horizontal position in order to utilize the lumbar support. If lumbar support is not desired, turn the lumbar support lever counterclockwise to a vertical position.