66 Operation Section Machine Operation SEBU7645-06 Autoshift Control! Automatic Mode (2) — Move the switch to position (2) for the autoshift function in the automatic mode. Move the switch to position (2) prior to shifting the transmission into forward or reverse in order to activate the autoshift function. The operator selects the highest desired (= Ss operating speed. The control selects the proper transmission gear according to the ground speed of the machine. Automatic downshifts into first gear are not aliowed. Press the downshift switch and release the downshift switch (4).
Hustration 52 g00885085 Manual Mode (3) ~ Push the bottom of the switch for the manual mode of the transmission control. The operator selects the desired speed and the desired direction in the manual mode with the transmission shift lever. Note: The initial transmission downshift will always respond. Subsequent downshifts will occur provided that an engine overspeed would not occur. Press the downshift switch and hold down the downshift switch (4) for continued downshifts until the machine is in first gear. The normal autoshift function continues in three seconds after the downshift switch is released.
Economy Mode (1) ~ The economy mode allows the transmission to operate in the same way as the autoshift mode, except r\< It that the transmission will shift at a lower engine rpm. illustration 53 g00886126 The downshift switch (4) that is located on the lift lever is only active when the speed selector is in second gear. Press the downshift switch and release the downshift switch (4) with the machine in second gear. The transmission will downshift to first gear. The transmission will remain in first gear until a speed change or a direction change is made.