69 Operation Section SEBU7645-06 Machine Operation Optional Work Tool Joystick Control g01126364 IHustration 56 (C) Auxiliary Hydraulic Control (thumb wheel) (E) Joystick Control Standard Work Tool Mode (L) Transmission Direction Control Switch (if Equipped) — With the Auxiliary Operating Mode Switch (M) in this position, the system provides intermittent flow for the auxiliary hydraulic function. In this mode, the detent function is disabled. The oil flow is proportional to the displacement of the thumb wheel (C). Move the thumb wheel (C) upward in order to provide flow to the left supply line. Move the control switch farther in order to increase the flow.
Move the thumb wheel (C) downward in order to provide flow to the right supply line. Move the control switch farther in order to increase the flow. Continuous Flow Mode — With the Auxiliary Operating Mode Switch (M) in this position, the system provides continuous flow for the right hand auxiliary hydraulic function. In this mode, the detent function is engaged. The thumb wheel (C) is an on/off switch. Move the thumb wheel (C) downward in order to provide continuous flow to the right supply line. Move the thumb wheel (C) in either direction in order to stop the flow. The flow control (F) will control the oil flow in Standard Work Tool Mode and in Continuous Flow Mode.
Adjust the flow with the flow control (F). Turn the flow control (F) clockwise in order to increase the flow. Turn the flow control (F) counterclockwise in order to decrease the flow. (M) Auxiliary Operating Mode Switch-(Third function)