68 SEBU7645-06 Operation Section Machine Operation Move the control to the center for the HOLD position. While the control is in position (8), turn the auxiliary flow control (F) clockwise in order to increase the flow. Turn the continuous flow control (F) counterclockwise in order to decrease the flow. 4th Auxiliary Hydraulic Control Lever (D) (If Equipped) Move the control to position (9) in order to pressurize the left supply line. Move the control to position (10) in order to pressurize the right supply line. Move the control to the center for the HOLD position.
Hydraulic Controi Support (if Equipped) IHustration 55 g01119120 (J) Hydraulic Control Support (K) Adjustment for Hydraulic Control Support The hydraulic control support (I) can be raised or lowered for operator comfort. in order to adjust the height of the support, pull out on the lever (J) and turn the lever counterclockwise. Pull up on the support in order to raise the support. Push down on the support in order to lower the support. Turn the lever clockwise in order to secure the support in the desired position.