71 SEBU7645-06 Operation Section Machine Operation Hydraulic Control Support (If Equipped) Directional Turn Signal and Hazard Flasher Control SS (EES Ly 3 /,. OQ aN ee g00884718 lilustration 61 Hazard Flashers (1) (If Equipped) — The hazard flasher may be activated by the switch on the left side of the steering g01182293 IHustration 59 (J) Hydraulic Control Support (K) Adjustment for Hydraulic Control Support console. The turn signal indicators on the front dash panel will flash when the hazard flasher is activated. The armrest is adjustable in all directions. Push the armrest or pull the armrest to the desired position. Lift the armrest in order to raise the armrest.
Pull back on the lever (K) in order to lower the armrest. Backup alarm (If Equipped) Hazard Flashers (2) (If Equipped) — Pull the turn signal lever upward in order to activate the hazard flashers. Both turn signal lights will flash. The turn signal indicators on the front dash panel will flash when the hazard flasher is activated. Directional Turn Signals (3) — The (=) directional turn signal lever is on the right side of the steering column. An indicator light on the front dash panel will flash when the turn signal is activated. Engine Start Switch g00892330 Illustration 60 <=, Backup Alarm - The alarm will sound 2) on!
SS when the transmission direction control lever is in the REVERSE position. The alarm is used to alert people behind the machine that \ the machine is backing up. The backup alarm is mounted at the rear of the machine behind the grill. g00679565 (1) OFF position. (2) ON position. (3) START position.