73 SEBU7645-06 Operation Section Machine Operation Ground Speed Limiter (If Equipped) The optional software for the speed limiter allows the operator to set the maximum ground speed for a machine that is operating on a level surface. The software uses the following inputs to conirol the ground speed of the machine: engine speed, machine acceleration, and ground speed. Note: The software will not prevent a machine from exceeding the speed limit during downhill travel. Heating and Air Conditioning Control Defogging — Press the top of the switch (1) in order to turn the air conditioner to the ON position. Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH).
Adjust the temperature control knob until the moisture level is lowered and the windshield and side windows are free of moisture. Rear Window Defroster (2) (if equipped) — Press the top of the switch in order to activate the rear window defroster. The defroster is set on a timer. The defroster will automatically turn off after the timer expires. Air Conditioner Switch (If Equipped) &) Air Conditioner Switch (1) — Press the top of the switch in order to turn the air conditioner to the ON position. Press the bottom of the switch in order to turn the air conditioner to the OFF position. g00865858 Hlustration 65 The heating and air conditioning system performs four functions:
Heating — Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH). Adjust the temperature control knob for the desired temperature. Cooling — Press the top of the switch (1) in order to turn the air conditioner to the ON position. Turn the blower fan switch control to the desired speed (LOW, MEDIUM, or HIGH). Adjust the temperature control knob for the desired temperature. Pressurizing — When heating or cooling is not desired, pressure inside the cab will heip keep dust out. Turn the temperature control knob for the desired temperature. To produce the volume of air that is needed to keep dust out, set the blower fan switch control to LOW, to MEDIUM, or to HIGH.
®PEO0O® Fan Control Fan Speed (3) - This knob controls the three-speed blower fan motor. OFF ~ Move the knob to this position in order to stop the blower fan motor. LOW -— Move the knob to this position for the lowest fan speed. MEDIUM — Move the knob to this position for a medium fan speed. HIGH — Move the knob to this position for the highest fan speed.