Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

79 SEBU7645-06 Operation Section Machine Operation Brake Pedals (1) — Use the left brake (P) RIGHT TURN — Move the steering wheel clockwise in order to steer the machine to pedal or the right brake pedal to slow down the machine's ground speed for normal the right. Turn the steering wheel farther in braking. order to achieve a more acute turn. Steering Column Tilt Control Dual Mode Steering (If Equipped) Dual mode steering is used to minimize operator fatigue in loading applications. The steering modes are “Regular Steer” and “Quick Steer’. Quick Steer allows the operator to select full steering action with minimal steering wheel action.

The Quick Steer mode should only be used at lower speeds. 6 LS BOOS OOG068s coe BP ET SS > O Note: Quick Steer cannot be used at higher speeds. It is important to limit the machine speed when Quick Steer mode is used. You cannot change steering modes while the machine is moving. In order to change to Quick Steer mode, complete the following steps: g00885264 iHlustration 77 1. Stop the machine. To adjust the steering column, pull up the steering column tilt lever and move the steering column to the desired position. Release the steering column tilt lever. The steering column will remain in the desired position. Steering Control 2. Place the transmission in neutral. 3.

Depress the dual mode steering switch. The Quick Steer indicator light should come on indicating that the machine is in Quick Steer mode. When the machine is in Quick Steer mode, the machine will operate only in first gear or second gear. Note: The steering mode will not change if secondary steering is activated. ES In order to change to regular steering mode, complete the following steps: 1. Stop the machine. 2. Place the transmission in neutral. g00885256 Illustration 78 Note: The steering frame lock must be separated in order to steer the machine. The steering wheel controls the directional steering of the machine. The machine will turn in the same direction as the steering wheel.

4) LEFT TURN — Move the steering wheel counterclockwise in order to steer the machine to the left. Turn the steering wheel farther in order to achieve a more acute turn. 3. Depress the dual mode steering switch. The Quick Steer indicator light should go off indicating that the machine is in reguiar steering mode. Note: When the parking brake is set, the Quick Steer will be disabled. If the transmission is in NEUTRAL for 5 minutes, the Quick Steer will be disabled.