Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

80 Operation Section SEBU7645-06 Machine Operation Transmission Direction Control Transmission Direction Control Switch (If Equipped) Selector Note: If the machine is equipped with a transmission direction control switch, both the transmission lever and the transmission switch must be in the NEUTRAL position before putting the machine into FORWARD or REVERSE. When you are using one of the controls, you cannot use the other control until both the transmission lever and the transmission switch are in NEUTRAL. Transmission Lever and Direction Control goossso46 lustration 80 The transmission direction control switch (if equipped) is located on the single lever control.

(F) FORWARD (1) — Move the transmission switch (if equipped) upward. The machine will move forward. (N) NEUTRAL (2) — The machine should not move when the transmission lever and the transmission switch (if equipped) are in neutral. (R) Illustration 79 g00866220 REVERSE (3) — Move the transmission switch (if equipped) downward. The machine will move in reverse. Speed Selector The transmission direction control lever is located on the steering console. (F) FORWARD (1) — Move the transmission lever upward. The machine will move forward.

(N) NEUTRAL (2) — The machine should not move when the transmission lever and the transmission switch (if equipped) are in (R) REVERSE (3) — Move the transmission lever downward. The machine will move IHustration 81 g00866252 in reverse. Rotate the transmission lever to the desired gear speed: “1” — First Speed *2” — Second Speed