Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

81 Operation Section SEBU7645-06 Machine Operation i03646558 “3” — Third Speed “4” Battery Disconnect Switch — Fourth Speed Window Wiper and Window Washer SMCS Code: 1411 SS g00883587 lHustration 83 Illustration 82 g00884707 men Front Window Wiper and Washer (1) — Turn the knob in order to turn on the window wiper. Push the knob in order to activate the window washer. wees Rear Window Wiper and Washer (2) — Turn the knob in order to turn on the window wiper. Push the knob in order to activate the window washer. Note: The machine is equipped with intermittent wipers. There are several positions that will affect the wipers.

Turn knob (1) or knob (2) clockwise from the OFF position for the desired setting (INTERMITTENT, LOW or HIGH). The delay speed of the wipers can be adjusted by turning the knob clockwise through the INTERMITTENT position. Open the access cover on the right side of the machine. The battery disconnect switch is located in the engine compartment. Cd) ON - Insert the battery disconnect switch key, and turn the battery disconnect switch key clockwise in order to activate the electrical system. The switch must be ON before you start the engine. O OFF — Turn the battery disconnect switch key counterclockwise in order to shut off the entire electrical system.

The battery disconnect switch and the engine start switch serve different functions. When the battery disconnect switch is turned off, the entire electrical system is disabled. When only the engine start switch is turned off, the battery remains connected to the electrical system. Turn the battery disconnect switch key to the OFF position and remove the battery disconnect switch key when you service the electrical system or you service any other components of the machine. Turn the battery disconnect switch key to the OFF position and remove the battery disconnect switch key when the machine is left for an extended period of one month or longer.

This procedure will prevent a short circuit from draining the battery. This procedure will also prevent the components from draining the battery. This procedure will also prevent the battery from being drained by vandalism.