82 SEBU7645-06 Operation Section Machine Operation 101683537 NOTICE Never turn the battery disconnect switch key to OFF with the engine running. Electrical system damage could result. Backup Alarm (If Equipped) SMCS Code: 7406 To ensure that no damage to the engine occurs, verify that the engine is fully operational before cranking the engine. Do not crank an engine that is not fully operational. Perform the following procedure in order to check the battery disconnect switch for proper operation: i Nc 8 1. With the battery disconnect switch in the ON position, verify that electrical components in the operator compartment are functioning. Verify that the hour meter is displaying information.
Verify that the engine will crank. 2. Turn the battery disconnect switch to the OFF position. 3. Verify that the following items are not functioning: electrical components in the operator compartment, hour meter, and engine cranking. if any of the items continue to function with the battery disconnect switch in the OFF position, g00892330 Illustration 84 Backup Alarm — The alarm will sound Oz when the transmission direction control lever is in the REVERSE position. The alarm is used to alert people behind the machine that the machine is backing up. consult your Caterpillar dealer. The backup alarm is mounted machine behind the grill. at the rear of the 101765287 Alert Indicators SMCS Code:
7450; 7451 Table 49 WARNING Warning Level OPERATION Alarm Action Lamp Level 1 OFF OFF Level 2 OFF Flashing Level 2-Special ON Flashing Level 3 Puisating Flashing The monitoring system has the following four warning levels for events: Level 1 — This warning level is identified by the illumination of a respective warning lamp. This warning level is used in order to indicate that the machine needs attention soon. No harm to the machine has occurred at this point.